The Fitzwilliam Museum

An image of Salet and Bevor
Sallet, with a moveable visor, for heavy field use. Formed of a one-piece skull with a long 'tail' over the neck, and a pivoted demi-visor. The skull has a rounded crown with a broad, medial keel at its apex, narrowing to a medial ridge at the front and rear. The centre of the keel is pierced with a large, circular hole between a pair of rivet-holes for the attachment of a threaded boss to receive a crest. The lower edge of the skull has a plain outward turn except at the front where it is cut away as a shallow face-opening that widens towards the bottom. The straight upper edge of the face-opening, which is flanged outwards very slightly and decorated at its edge with a single incised line, forms the upper edge of the vision-slit. Just above the level of the vision-slit, the skull is encircled by a series of twenty-one lining-rivets beneath a single, decorative incised line. The front nine rivets are externally flush with flat internal heads, while the remainder are round-headed with circular internal washers of which two are missing. The rivets and washers are all replaced, as are the buff-leather lining-band and the buff-leather loops for chin-straps at either side that they retain. A similar pair of round-headed rivets with circular internal washers retaining a buff-leather suspension-loop within the nape are likewise replaced. Five pairs of small holes around the lower edge of the skull and another to either side of the face-opening served to sew in the lining. A single hole at either side of the face-opening and a corresponding hole at either side of the visor, which served as construction-holes during manufacture, have been plugged with rivets. At the right lower corner of the face-opening is a push-button-operated spring-catch that engages a hole in the right lower corner of the visor. The mushroom-shaped push-button is probably replaced, as are the pair of small, round-headed rivets that retain the flat internal spring. The viso

Terms of use

These images are provided for non-commercial use under a Creative Commons License (BY-NC-ND). To license a high resolution version, please contact our image library who will discuss fees, terms and waivers.

Download this image

Creative commons explained - what it means, how you can use our's and other people's content.

Salet and Bevor Sallet, with a moveable visor, for heavy field use. Formed of a one-piece skull with a long 'tail' over the neck, and a pivoted demi-visor. The skull has a rounded crown with a broad, medial keel at its apex, narrowing to a medial ridge at the front and rear. The centre of the keel is pierced with a large, circular hole between a pair of rivet-holes for the attachment of a threaded boss to receive a crest. The lower edge of the skull has a plain outward turn except at the front where it is cut away as a shallow face-opening that widens towards the bottom. The straight upper edge of the face-opening, which is flanged outwards very slightly and decorated at its edge with a single incised line, forms the upper edge of the vision-slit. Just above the level of the vision-slit, the skull is encircled by a series of twenty-one lining-rivets beneath a single, decorative incised line. The front nine rivets are externally flush with flat internal heads, while the remainder are round-headed with circular internal washers of which two are missing. The rivets and washers are all replaced, as are the buff-leather lining-band and the buff-leather loops for chin-straps at either side that they retain. A similar pair of round-headed rivets with circular internal washers retaining a buff-leather suspension-loop within the nape are likewise replaced. Five pairs of small holes around the lower edge of the skull and another to either side of the face-opening served to sew in the lining. A single hole at either side of the face-opening and a corresponding hole at either side of the visor, which served as construction-holes during manufacture, have been plugged with rivets. At the right lower corner of the face-opening is a push-button-operated spring-catch that engages a hole in the right lower corner of the visor. The mushroom-shaped push-button is probably replaced, as are the pair of small, round-headed rivets that retain the flat internal spring. The viso

Image data

Accession Number: M.4A & B-1939
Photograph copyright © The Fitzwilliam Museum, Cambridge
Aperture: f/32.0
Focal length: 75
Camera: Canon EOS 5D
Photographer name: Michael Jones
Image height: 760 pixels
Image width: 521 pixels
Processed with: ACD Systems Digital Imaging
Filesize: 59.49kB
Exposure time: 1/100
ISO Speed: 100
Fnumber: 32/1
Captured: 2008:09:11 12:02:31

Citation for print

This page can be cited in the Harvard Bibliographic style using the text below:


            The Fitzwilliam Museum (2024)
            ""
            Web page available at: https://collection.beta.fitz.ms/id/image/media-1215746003 Accessed: 2024-12-19 01:07:06

Citation for Wikipedia

To cite this page on Wikipedia you can use this code snippet:


            {{cite web|url=https://collection.beta.fitz.ms/id/image/media-1215746003
            |title=
            |author=The Fitzwilliam Museum|accessdate=2024-12-19 01:07:06|publisher=The
            University of Cambridge}}

API call for this record

To call these data via our API (remember this needs to be authenticated) you can use this code snippet:

https://collection.beta.fitz.ms/api/v1/images/media-13527

Bootstrap HTML code for reuse

To use this as a simple code embed, copy this string:

<div class="text-center">
    <figure class="figure">
        <img src="https://data.fitzmuseum.cam.ac.uk/imagestore/aa/aa20/M_4A_20_26_20B_1939.jpg"
        alt="Sallet"
        class="img-fluid" />
        <figcaption class="figure-caption text-info"></figcaption>
    </figure>
</div>