IDENTIFIERS ----------- id: 17925 accession number: HEN.M.14I-1933 DATE AUDIT ---------- created: Saturday 6 August 2011 updated: Wednesday 14 September 2022 DESCRIPTIVE DATA ---------------- object type: Gauntlet for the right hand, of fingered form, for field use. Formed of a fairly short, flared cuff, a wrist-plate, five metacarpal-plates, a knuckle-plate, five scaled finger-defences, and a hinged, scaled thumb-defence. The cuff is formed of an outer plate and a slightly shorter inner plate. The latter fits within the former and is secured to it at either side by two rivets. Both rivets were originally of flat-headed type, but the lower one has in each case been replaced by one of brass with a round head. The medially-ridged outer plate rises to an obtuse central point. The upper edge of the cuff has a plain inward turn, bordered by sixteen modern round-headed brass lining-rivets. The lower edge of the cuff has a plain outward turn at the inside of the wrist where it is cut away in a concave curve. Each side of the lower edge of the cuff is pierced with a modern wiring-hole. The outer plate of the cuff is linked by a wrist-plate to a series of five metacarpal plates and a knuckle plate. The cuff, the metacarpal-plates and the knuckle-plate all overlap inwards to the wrist-plate. The wrist-plate and the metacarpal-plates are medially-ridged, while the knuckle-plate is transversely-ridged and shaped between the fingers. The lower edge of the cuff and the upper edges of the metacarpal-plates and the knuckle plate are all bevelled. The edges are bordered by single incised lines and decorated medially with V-shaped nicks. A single transverse incised line also decorates the wrist-plate mid-way between its upper and lower edges. The lower edge of the knuckle-plate is chipped at the centre of the fourth finger. The wrist-plate, cuff, the metacarpal-plates and the knuckle-plate are connected to one another at their outer ends by modern, round-headed, brass rivets. The edges of the plates project as obtusely-pointed lobes at their articulation-points. Attached within the knuckle-plate by pairs of modern round-headed brass rivets with octagonal internal washers are four finger-defences formed of between five and seven transversely-curved, downward-overlapping scales, of which the last has a rounded end. All of the scales of the second finger and the first scale of the first finger are original and have bevelled lower edges. They are secured to their underlying modern leather strips by pairs of externally-flush rivets except in the case of the last scale of the second finger, which is secured by a pair of externally-flush rivets proximally, and a single round-headed brass rivet with an octagonal internal washer distally. The remaining scales are modern restorations secured to their underlying leather strips by single externally-flush rivets except in the case of the last scales of the first, third and fourth fingers which are secured by single externally-flush rivets proximally, and single round-headed brass rivets with polygonal internal washers distally. The last lame of the fourth finger is incorrectly overlapped by the preceding lame which is pierced with a rivet-hole distally. Attached by a modern buff-leather hinge to the front edge of the gauntlet is a large modern thumb-defence. The hinge is secured to the gauntlet by the same rivet that connects the fourth and fifth metacarpal-plates to one another. The rivet is fitted with an octagonal internal washer. The hinge is secured to the rear edge of the main plate of the thumb-defence by a pair of round-headed brass rivets with octagonal internal washers. The main plate is of lozenge shape with a truncated lower end where it overlaps three downward-overlapping scales matching those of the finger-defences. The upper end of the main plate curves outwards and is medially-ridged. The lower end of the ridge terminates over the knuckle in a chevron-shaped step. The lower part of the front edge of the main plate is flanged inwards. A round-headed rivet located at the rear edge of the main plate probably served to secure a leather loop that passed around the thumb. Part of the composite armour HEN.M.14A-L-1933. title: gauntlet NOTES ----- type: history note value: Mr James Stewart Henderson of 'Abbotsford', Downs Road, St Helen's Park, Hastings, Sussex. LICENSING --------- text license status: CC0 image license status: CC-BY-NC-SA OWNERSHIP --------- instutition: The Fitzwilliam Museum department: Applied Arts collection: J.S. Henderson creditline: J.S. Henderson Bequest STABLE URL ---------- url: https://data.fitzmuseum.cam.ac.uk/id/object/17925 TECHNIQUES ---------- formed of a fairly short, flared cuff, a wrist-plate, five metacarpal-plates, a knuckle-plate, five scaled finger-defences, and a hinged, scaled thumb-defence; hammered, shaped, riveted, medially and transversely-ridged, with bevelled and incised decoration and V-shaped nicks hammering TECHNIQUES ---------- patinating TECHNIQUES ---------- forming CATEGORIES ------ category: armour DATING ------ creation date: 1610 - 1620 creation date earliest: 1610 creation date latest: 1620 culture: 17th Century, Early# CREATORS -------- maker: Unknown DIMENSIONS ---------- dimension: Depth units: cm value: 13.1 dimension: Height units: cm value: 30.5 dimension: Weight units: kg value: 0.59 dimension: Width units: cm value: 13