Skip to main content

Close helmet: HEN.M.11A-1933

Object information

Awaiting location update

Maker(s)

Production: Unknown

Entities

Categories

Description

Close helmet. Composed of elements originally made for heavy cavalry use but later adapted to one another for funerary use. Formed of a one-piece skull with a visor, upper bevor and bevor attached to it by common pivots, and two restored gorget-plates front and rear. The skull has a high, transversely-roped comb that extends from the brow to just above the nape. It is pierced a short distance forward of its apex with a circular hole, probably for the later attachment of a funerary crest. A large hole in the left rear of the skull is repaired with a riveted internal patch. A slightly smaller hole at the base of the front left of the comb is repaired by brasing. The front edge of the skull is cut away in a broad, arched face-opening bordered by eight externally-flush lining-rivets. The second lining-rivet from the left is one of three externally-flush rivets that secures an old internal patch that repairs a large crack in the edge of the face-opening. The lower half of the face-opening has been cut back crudely, perhaps at the time that the helmet was converted to funerary use. The rear edge of the skull extends down to the nape where it is flanged outwards to receive the rear gorget-plates. Three round-headed lining-rivets with octagonal internal washers run around the rear of the skull at the height of the nape. Riveted at the right of the neck, at the same height as the lining-rivets, is a pierced oval stud that serves to receive a swivel-hook riveted at the right side of the bevor. The right side of the brow of the skull is pierced with a small hole that aligns with a later-plugged hole in the visor, suggesting that the two elements were at one time rigidly secured to one another. Each side of the skull is pierced with a hole to receive the pivots that attach the visor, upper bevor and bevor. The pivots take the form of low-domed rivets, each decorated with eight radiating lines. The medially-ridged visor has a low brow which is decorated at the centre of its upper edge with a filed ogee. It has a stepped, centrally-divided vision-slit. Below the sight, the visor projects forward to a 'sparrow's beak'. Its lower edge is angled inwards to nestle within the upper bevor. Riveted at the right side of the visor, at the rear end of its inward-angle section, is a lifting-peg of octagonal cross-section, that tapers slightly to its moulded baluster, and is decorated near its base and mid-point with transverse file lines. The right side of the visor is pierced just above the angle with a row of four small ventilation-holes and, behind them, a slightly larger hole that may have served as the original attachment-point of the lifting-peg. The prow-shaped upper bevor has roughly-rounded terminals. Its upper edge is decorated with a file-roped, inward turn accompanied by a recessed border. The edge is cut with a deep U-shaped notch about a third of the way along from the front at the right side, to accommodate the lifting-peg of the visor. Attached by a brass-capped, round-headed rivet at the front right of the lower edge of the upper bevor is a modern swivel-hook that engages a pierced stud riveted at the right of the bevor. A hole located a short distance above the swivel-hook and now plugged with an externally-flush rivet may have served to attach an earlier hook or catch. The lower edge of the upper bevor is cracked just in front of the right pivot. The medially-ridged bevor is shaped to the chin and cut away at the front to form a fairly shallow, U-shaped face-opening. The edge of the face-opening has a file-roped inward turn. The upper end of the left rear edge of the bevor is repaired with an old, riveted, internal patch. Just forward of the patch are two rust-holes. Riveted at the right of the chin is a pierced oval stud that receives the swivel-hook riveted at the right of the visor. Attached by a small round-headed rivet at the right of the neck of the bevor is a further swivel-hook that engages the pierced stud riveted at the right of the neck of the skull. The neck of the swivel-hook is decorated with three raised belts. The lower edge of the bevor is flanged outwards to receive the front gorget-plates. The helmet is fitted with two modern, upward-overlapping gorget-plates front and rear. The front plates are medially ridged. The lower edge of the bottom front plate descends to an obtuse central point, while that of the bottom rear plate is slightly convex. The lower edge in each instance has a file-roped, inward turn accompanied by a recessed border containing seven round-headed brass lining-rivets. The upper edge of each gorget-plate is bordered by a single incised line. The front and rear gorget-plates are connected to one another and to the flanged lower edges of the bevor and skull, respectively, at their outer ends, by round-headed brass rivets. The rivets at the left end of the rear gorget-plates have lost their heads. The upper one is fitted with an internal washer. Vacant rivet-holes occur just below and to the inside of each of the connecting-rivets in the top rear gorget-plate. They also occur at the centres of the flanged lower edges of the bevor and skull. Two further holes occur in the flange of the skull, just to the inside of the right connecting-rivet. The outer of the two holes is plugged with an externally-flush rivet, while the other remains vacant. Part of the composite three-quarter armour HEN.M.11A-H-1933

Notes

History note: Mr James Stewart Henderson of 'Abbotsford', Downs Road, St Helen's Park, Hastings, Sussex

Legal notes

J.S. Henderson Bequest

Measurements and weight

Depth: 35.1 cm
Height: 38.1 cm
Weight: 2.45 kg
Width: 23.2 cm

Acquisition and important dates

Method of acquisition: Bequeathed (1933-03-16) by Henderson, James Stewart

Dating

16th Century
Circa 1520 CE - 1530 CE Production date: circa AD 1560 : helmet about 1560, the visor about 1520-30

Note

The helmet is bright with medium to heavy pitting and patination overall, except on the restored gorget-plates which show a light patination.

The visor fits the skull poorly and is clearly of an earlier date than the rest of the helmet. It was originally a full visor of 'sparrow's beak' form, but has had its lower edge cut off to fit within its present upper bevor. The crude cutting of the face-opening of the skull, and the terminals and probably the lower edge of the bevor suggest that the remaining elements of the helmet may also have been adapted to one another for funerary use.

Components of the work

Rivet Caps composed of brass (alloy)
Bevor
Decoration
Gorget-plates
Parts
Visor

Materials used in production

Steel

Techniques used in production

Hammering : Formed of a one-piece skull with a visor, upper bevor and bevor attached to it by common pivots, and two restored gorget-plates front and rear; hammered, shaped, riveted, medially-ridged, with file-roped, incised and raised decoration
Patinating
Forming

Identification numbers

Accession number: HEN.M.11A-1933
Primary reference Number: 17802
Stable URI

Audit data

Created: Saturday 6 August 2011 Updated: Friday 8 January 2016 Last processed: Friday 8 December 2023

Associated departments & institutions

Owner or interested party: The Fitzwilliam Museum
Associated department: Applied Arts

Citation for print

This record can be cited in the Harvard Bibliographic style using the text below:

The Fitzwilliam Museum (2024) "Close helmet" Web page available at: https://collection.beta.fitz.ms/id/object/17802 Accessed: 2024-12-23 05:53:24

Citation for Wikipedia

To cite this record on Wikipedia you can use this code snippet:

{{cite web|url=https://collection.beta.fitz.ms/id/object/17802 |title=Close helmet |author=The Fitzwilliam Museum|accessdate=2024-12-23 05:53:24|publisher=The University of Cambridge}}

API call for this record

To call these data via our API (remember this needs to be authenticated) you can use this code snippet:

https://collection.beta.fitz.ms/api/v1/objects/object-17802

Sign up for updates

Updates about future exhibitions and displays, family activities, virtual events & news. You'll be the first to know...