Collar, for field use, in the North Italian style. Formed of two upward-overlapping lames front and rear. The top lame in each instance has a prominent, file-roped, inward turn at its upper edge. The turn in each is bordered by five small, round-headed lining-rivets with circular, internal washers. The bottom lame in each instance is considerably deeper than the first lame. The front one has a strongly convex lower edge, and the rear one, a slightly convex lower edge with strongly rounded corners. The lower edge in each instance has a plain, partial inward turn accompanied by a recessed border. The borders of the front and rear lames contain, respectively, seven and five round-headed lining-rivets of brass. The upper edge of the bottom lame in each instance is flanged upwards to receive the top lame. It is bordered by a single incised line, now much worn. The lames were originally connected to one another by three internal leathers front and rear. The leathers were retained by single, externally-flush rivets in the top lame and single, round-headed, brass rivets with circular, internal washers in the bottom lame. The central leathers have been cut from straps. The front one shows holes for the tongue of a buckle. The outer leathers are missing. To compensate for their loss, the lames have now been rigidly secured to one another by round-headed brass rivets with circular, internal washers occupying the elongated leathering-holes in the top-lame and the overlying construction-holes in the bottom lame. The latter would originally have been occupied by independent, purely decorative round-headed rivets. The front and rear sections of the collar are connected to one another at the left side by a rectangular hinge with cropped corners secured within the top lame by a pair of rivets front and rear. The rivets at the front are externally-flush, while the rivets at the rear are later replacements with small, flattened round heads. The front and rear sections of the collar are fastened to one another at the right side by means of a mushroom-shaped stud of brass riveted to the bottom rear lame engaging a keyhole-slot in the corresponding front lame, and a small, plain stud riveted to a tongue-like projection of the top rear lame engaging a circular hole in the corresponding front lame. Secured by a brass-capped, round-headed rivet at the top of each shoulder of the bottom rear lame is a buff-leather strap for the attachment of the pauldrons. Part of the composite half armour HEN.M.13A-F-1933.
History note: Mr James Stewart Henderson of 'Abbotsford', Downs Road, St Helen's Park, Hastings, Sussex.
J.S. Henderson Bequest
Depth: 23.6 cm
Height: 17.2 cm
Weight: 0.8 kg
Width: 31.2 cm
Method of acquisition: Bequeathed (1933-03-16) by Henderson, James Stewart
19th Century
Circa
1800
-
1900
North Italian style
The collar is bright with a light patination overall.
Rivets
composed of
brass (alloy)
Central Leathers
composed of
leather
Strap
composed of
leather
Borders
Decoration
Front And Rear
Parts
Hammering
: Formed of two upward-overlapping lames front and rear; hammered, shaped, riveted, hinged front and rear section, with recessed borders and file-roped decoration
Patinating
Forming
Accession number: HEN.M.13B-1933
Primary reference Number: 17866
Stable URI
Owner or interested party:
The Fitzwilliam Museum
Associated department:
Applied Arts
This record can be cited in the Harvard Bibliographic style using the text below:
The Fitzwilliam Museum (2024) "Collar" Web page available at: https://collection.beta.fitz.ms/id/object/17866 Accessed: 2024-11-25 07:14:18
To cite this record on Wikipedia you can use this code snippet:
{{cite web|url=https://collection.beta.fitz.ms/id/object/17866
|title=Collar
|author=The Fitzwilliam Museum|accessdate=2024-11-25 07:14:18|publisher=The
University of Cambridge}}
To call these data via our API (remember this needs to be authenticated) you can use this code snippet:
https://collection.beta.fitz.ms/api/v1/objects/object-17866
Updates about future exhibitions and displays, family activities, virtual events & news. You'll be the first to know...